How do I replace the battery box or eHarness?Updated 2 months ago

Tool & screws needed:

• Torx key TX30 (included in your Foil Assist Screw & Tool Set)
• 4x M6x18 & washers (spare screws: Foil Assist Maintenance Screws 40260-8008)

Steps to remove and install the battery box or eHarness:

• Loosen the four screws of the battery box on the inside of the eHarness.
• Remove the battery box.
• Attach the new battery box or the new eHarness using the four screws and washers.

⚠ Ensure the valve is properly seated in the eharness hole before tightening the box to avoid damage.