How do I replace the receiver in the battery box?Updated 2 months ago

Tool & screws needed:

• Torx Key TX10 (included in your Foil Assist Screw & Tool Set)
• 2x M3x6 (spare screws: Foil Assist Maintenance Screws 40260-8008)

Steps to change the battery box receiver:

1. Open the box.
2. Remove the two screws from the receiver cover.
3. Take off the receiver cover.
4. Disconnect the receiver connector.
5. Connect the new receiver to the box connector.
6. Insert the connector into the box.
7. Place the cap on top of the connector.
8. Screw the two screws back onto the receiver cover.