What can I do if the system doesn't start up or pair?Updated 2 months ago

Possible Causes

• Both batteries were not turned on at the same time.
• Batteries have been on for more than 20 seconds before pairing.
• Motor bell not installed (no startup beep detectable).
• Multiple units being turned on or paired nearby at the same time.

Actions

1. Ensure both batteries are switched on simultaneously.
2. Verify the system produces the startup beep (motor bell must be installed).
3. Pair the remote within 20 seconds of powering on the batteries.
4. Make sure no other nearby units are being powered or paired during the process.